Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 627
53-1002448-01
SEC-1304
94
SEC-1304
Message <timestamp>, [SEC-1304], <sequence-number>,, INFO, <system-name>, This switch has
no security license.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for
that specific switch.
Severity INFO
SEC-1305
Message <timestamp>, [SEC-1305], <sequence-number>,, INFO, <system-name>, This switch has
no zoning license.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be
in the ready state. If a switch is in the error state, the database might not be correctly updated for
that specific switch.
Severity INFO
SEC-1306
Message <timestamp>, [SEC-1306], <sequence-number>,, INFO, <system-name>, Failed to
verify certificate with root CA.
Probable Cause Indicates the certificate could not be verified with root certificate authority (CA). This could happen
if an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a root
CA certificate does not exist on the switch.
Recommended
Action
Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects
outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an
unauthorized switch is not trying to access the fabric.
Severity INFO