Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 631
53-1002448-01
SEC-1318
94
Recommended
Action
If a policy conflict exists, resolve it, then wait for the fabric to become stable. Retry the distribution.
Severity INFO
SEC-1318
Message <timestamp>, [SEC-1318], <sequence-number>,, INFO, <system-name>, Transaction
rejected due to inconsistent fabric.
Probable Cause Indicates that some domains detected an inconsistent fabric.
Recommended
Action
Resolve the policy conflict, if there is one, then wait for the fabric to stabilize. Retry the distribution.
Severity INFO
SEC-1319
Message <timestamp>, [SEC-1319], <sequence-number>,, INFO, <system-name>, <Event name>
updated <Datasets updated> dbs(s).
Probable Cause Indicates the specified event has occurred.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1320
Message <timestamp>, [SEC-1320], <sequence-number>,, WARNING, <system-name>, Non-acl
domain <Domain Number> tries to join a fabric with strict fabric wide policy
Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a
strict fabric-wide policy.
Recommended
Action
No action is required. The domain is denied by disallowing all its E_ports from connecting to the
fabric.
Severity WARNING
SEC-1321
Message <timestamp>, [SEC-1321], <sequence-number>,, ERROR, <system-name>, Failed secure
mode enable command. Reason: <Reason>.
Probable Cause Indicates the security enable failed on the fabric because the switch has a conflicting configuration
such as fabric wide consistency configuration or AD configuration.