Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 657
53-1002448-01
SPC-3007
97
Recommended
Action
For status code 14, complete primary KEK generation; otherwise, contact your switch service
provider.
Severity ERROR
SPC-3007
Message <timestamp>, [SPC-3007], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: DEK create error: <SP status code>,
info: <other info>.
Probable Cause Indicates the cause depends on the SP status code:
• 2 - Invalid input DEK specification
• 21 - No primary KEK exists with which to wrap the DEK
• 14 - Creation not allowed: primary KEK generation is in progress
• 31 - DEK could not be wrapped
• 73 - Invalid KEK format
• other - Internal error
Recommended
Action
For status code 14, complete primary KEK generation; otherwise, contact your switch service
provider.
Severity ERROR
SPC-3008
Message <timestamp>, [SPC-3008], <sequence-number>,, INFO, <system-name>, S<slot number
containing Encryption Engine>, <module name>: SP crypto got READY notification.
Probable Cause Indicates the key application (KPD) within the Crypto Module of the EE has been started.
Recommended
Action
No action is required.
Severity INFO
SPC-3009
Message <timestamp>, [SPC-3009], <sequence-number>,, ERROR, <system-name>, S<slot number
containing Encryption Engine>, <module name>: FIPS certificate mismatch,
certificate: <FIPS certificate is CO-0 or User-1>.
Probable Cause Indicates the FIPS certificate within the Crypto Module does not match that of the node.
Recommended
Action
Zeroize the EE (after backing up any needed primary or secondary KEK), then execute the cryptocfg
--initEE and cryptocfg --regEE commands.
Severity ERROR