Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 673
53-1002448-01
Chapter
99
SS System Messages
SS-1000
Message <timestamp>, [SS-1000], <sequence-number>,, INFO, <system-name>, supportSave has
uploaded support information to the host with IP address <host ip>.
Probable Cause Indicates that the supportSave command was used to transfer support information to a remote
location.
Recommended
Action
No action is required.
Severity INFO
SS-1001
Message <timestamp>, [SS-1001], <sequence-number>,, WARNING, <system-name>, supportSave's
upload operation to host IP address <host ip> aborted.
Probable Cause Indicates that a file copy error has occurred during execution of the supportSave command.
Complete error information cannot always be displayed in this message because of possible errors
in subcommands being executed by the supportSave command.
Recommended
Action
Check the remote server settings. Execute the supportFtp command to set the FTP or SCP
parameters. After the problem is corrected, execute the supportSave command again.
Severity WARNING
SS-1002
Message <timestamp>, [SS-1002], <sequence-number>,, INFO, <system-name>, supportSave has
stored support information to the USB storage device.
Probable Cause Indicates that the supportSave command was used to transfer support information to an attached
USB storage device.
Recommended
Action
No action is required.
Severity INFO