Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

678 Fabric OS Message Reference
53-1002448-01
SSMD-1004
100
SSMD-1004
Message <timestamp>, [SSMD-1004], <sequence-number>,, ERROR, <system-name>, Failed to
unlock semaphore mutex: (<function name>).
Probable Cause Indicates that the specified function has failed to unlock the mutex (semaphore).
Recommended
Action
Restart or power cycle the switch.
Severity ERROR
SSMD-1005
Message <timestamp>, [SSMD-1005], <sequence-number>,, ERROR, <system-name>, SSM start up
failed.
Probable Cause Indicates that Data Center Ethernet (DCE) SSM encountered an unexpected severe error during
basic start up and initialization.
Recommended
Action
Restart or power cycle the switch. If the probelm persists, download a new firmware using the
firmwareDownload command.
Severity ERROR
SSMD-1006
Message <timestamp>, [SSMD-1006], <sequence-number>,, ERROR, <system-name>, Error while
configuring ACL <ACL name> on interface <Interface name>.
Probable Cause Indicates that an error occurred while programming a TCAM entry on the specified interface.
Recommended
Action
Try again after sometime. If the problem persists, execute the supportSave command and then
restart or power cycle the switch.
Severity ERROR
SSMD-1007
Message <timestamp>, [SSMD-1007], <sequence-number>,, ERROR, <system-name>, Error while
removing ACL <ACL name> from interface <Interface name>.
Probable Cause Indicates that an error occurred while programming a TCAM entry on the specified interface.