Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
811812813814815816817818819820
Fabric OS Message Reference 733
53-1002448-01
Chapter
110
UPTH System Messages
UPTH-1001
Message <timestamp>, [UPTH-1001], <sequence-number>,, WARNING, <system-name>, No minimum
cost path in candidate list.
Probable Cause Indicates the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists
in the candidate list (domain ID list).
Recommended
Action
No action is required. This will end the current SPF computation.
Severity WARNING
UPTH-1002
Message <timestamp>, [UPTH-1002], <sequence-number>,, WARNING, <system-name>, Domain
<domain ID> is unreachable because the enabled TI zone is not compatible with the
fabric configuration.
Probable Cause Indicates the specified switch is unreachable because of the TI zone and the fabric configuration
incompatibility.
Recommended
Action
Clear all TI zones and refer to the TI zone user manual for instructions on how to create a valid TI
zone for your fabric configuration.
Severity WARNING