Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

742 Fabric OS Message Reference
53-1002448-01
XTUN-1003
113
XTUN-1003
Message <timestamp>, [XTUN-1003], <sequence-number>,, ERROR, <system-name>, FCIP Tunnel
<VE Port (Tunnel) Number> Message Transmission failed:I/T/L/E:<FC Initiator
ID>/<FC Target ID>/<FCP Logical Unit Number>/<Error return value>.
Probable Cause Indicates a message transmission failure.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your customer support for
assistance.
Severity ERROR
XTUN-1004
Message <timestamp>, [XTUN-1004], <sequence-number>,, ERROR, <system-name>, FCIP Tunnel
<VE Port (Tunnel) Number> Exchange aborted:I/T/L:<FC Initiator ID>/<FC Target
ID>/<FCP Logical Unit Number>.
Probable Cause Indicates that the FCP exchange has been aborted by the Initiator.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer
support for assistance.
Severity ERROR
XTUN-1005
Message <timestamp>, [XTUN-1005], <sequence-number>,, WARNING, <system-name>, FCP
emulation for Tunnel/Initiator/Target/LUN:<VE Port (Tunnel) Number>/<FC Initiator
ID>/<FC Target ID>/<FCP Logical Unit Number> may not be optimal.
Probable Cause Indicates that the FCP emulation is in Fastwrite mode and could also be in Tape Pipelining mode.
Recommended
Action
For disk devices, no action is required. For tape devices, device rediscovery is required.
Severity WARNING
XTUN-1996
Message <timestamp>, [XTUN-1996], <sequence-number>,, INFO, <system-name>, FTRACE buffer
<FTRACE Trace Buffer Number> on slot <FX8-24 Slot Number> DP <FX8-24 DP Number>
has been cleared.
Probable Cause Indicates that a CLI command or a support save operation freed the trace buffer back into the
FTRACE free pool.