Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

750 Fabric OS Message Reference
53-1002448-01
ZEUS-1004
114
ZEUS-1004
Message <timestamp>, [ZEUS-1004], <sequence-number>, , ERROR, <system-name>, S<slot
number>,C<chip index>: Invalid DMA ch pointer, chan:<Channel number>,
good_addr:0x<Good address> bad_addr:0x<Bad address>.
Probable Cause Indicates an internal error in the application specific integrated circuit (ASIC) hardware that may
degrade data traffic.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the blade.
Severity ERROR
ZEUS-1005
Message <timestamp>, [ZEUS-1005], <sequence-number>, , ERROR, <system-name>, S<slot
number>,C<chip index>,A<zeus id>: Memory allocation failed.
Probable Cause Indicates the memory allocation failure in the software.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the CP blade.
Severity ERROR
ZEUS-1015
Message <timestamp>, [ZEUS-1015], <sequence-number>, , WARNING, <system-name>, Port
re-initialized due to Link Reset failure on internal Port S<slot number>,P<port
number>(<blade port number>).
Probable Cause Indicates that port got re-initialized due to Link Reset failure.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity WARNING
ZEUS-1016
Message <timestamp>, [ZEUS-1016], <sequence-number>, , WARNING, <system-name>, Port is
faulted due to port re-initialization failure on internal Port S<slot
number>,P<port number>(<blade port number>) with reason <port fault reason>.
Probable Cause Indicates that port is faulted due to port re-initialization failure.