Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

756 Fabric OS Message Reference
53-1002448-01
ZONE-1013
115
ZONE-1013
Message <timestamp>, [ZONE-1013], <sequence-number>,, WARNING, <system-name>, QuickLoop
not supported.
Probable Cause Indicates that the QuickLoop feature is not supported in the current version of Fabric OS.
QuickLoop zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning
configuration is enabled on the switch, it will not be supported.
Recommended
Action
Edit the zone database to remove the QuickLoop zoning definition in the effective configuration.
Severity WARNING
ZONE-1014
Message <timestamp>, [ZONE-1014], <sequence-number>,, ERROR, <system-name>, Missing
required license - <license name>.
Probable Cause Indicates that the required zoning license is missing.
Recommended
Action
Install the zoning license using the licenseAdd command. Contact your switch supplier to obtain a
zoning license if you do not have one.
Severity ERROR
ZONE-1015
Message <timestamp>, [ZONE-1015], <sequence-number>,, WARNING, <system-name>, Not owner
of the current transaction <transaction ID>.
Probable Cause Indicates that a zoning change operation is not allowed because the zoning transaction is opened
by another task. Indicates concurrent modification of the zone database by multiple
administrators.
Recommended
Action
Wait until the previous transaction is completed. Verify that only one administrator is working with
the zone database at a time.
Severity WARNING
ZONE-1017
Message <timestamp>, [ZONE-1017], <sequence-number>,, ERROR, <system-name>, FA Zone(<zone
name>) contains incorrect number of Initiator and Target devices.
Probable Cause Indicates that the fabric assist (FA) zoning configuration has more than one initiator. This is
because of incorrect entries in the FA zoning configuration.