Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

758 Fabric OS Message Reference
53-1002448-01
ZONE-1022
115
ZONE-1022
Message <timestamp>, [ZONE-1022], <sequence-number>,, INFO, <system-name>, The effective
configuration has changed to <Effective configuration name>. <AD Id>
Probable Cause Indicates that the effective zone configuration has changed to the specified zone name.
Recommended
Action
Verify that the event was planned. If the event was planned, no action is required. If the event was
not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
ZONE-1023
Message <timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>, Switch
connected to port (<port number>) is busy. Retrying zone merge.
Probable Cause Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the
other side of the port is busy.
Recommended
Action
If the problem persists, execute supportFtp (as needed) to set up automatic FTP transfers; then
execute the supportSave command and contact your switch service provider.
Severity INFO
ZONE-1024
Message <timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>, <Information
message>.
Probable Cause Indicates that the cfgSave command has completed successfully.
Recommended
Action
No action is required.
Severity INFO
ZONE-1026
Message <timestamp>, [ZONE-1026], <sequence-number>,, INFO, <system-name>, port <port
number> Out of CAM entries.
Probable Cause Indicates that the total number of S_ID entries for creating or adding a zone group exceeds the
limit.
Recommended
Action
If hardware zoning enforcement is preferred, edit the zoning database to have zoned PIDs for that
port.
Severity INFO