Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

760 Fabric OS Message Reference
53-1002448-01
ZONE-1030
115
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
Severity WARNING
ZONE-1030
Message <timestamp>, [ZONE-1030], <sequence-number>,, WARNING, <system-name>, Converting
the zone db for PID format change failed.
Probable Cause Indicates that the current zone database could not be converted to reflect the PID format change.
Most likely this is caused by the size of the zone database.
Recommended
Action
Change the PID format back to its original format. Reduce the size of the zone database. Retry the
IPD format change operation.
Severity WARNING
ZONE-1031
Message <timestamp>, [ZONE-1031], <sequence-number>,, ERROR, <system-name>, Switch is in
interop mode. (switch, port) members not supported.
Probable Cause Indicates the switch is set to interop mode using the interopMode command. Interop mode does
not allow D,I members in the active zone database.
Recommended
Action
Remove all D,I members from the zone database, or convert them to WWN zoning.
Severity ERROR
ZONE-1032
Message <timestamp>, [ZONE-1032], <sequence-number>,, ERROR, <system-name>, Domain
<domain number> Max Zone DB size <max zone db size>.
Probable Cause Indicates that the specified domain does not have enough memory for the zone database being
committed.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity ERROR