Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 763
53-1002448-01
ZONE-1040
115
ZONE-1040
Message <timestamp>, [ZONE-1040], <sequence-number>,, INFO, <system-name>, Merged zone
database exceeds limit.
Probable Cause Indicates that the Fabric OS cannot read the merged zone configuration file. Typically, the zone
configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity INFO
ZONE-1041
Message <timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <system-name>, Unstable
link detected during merge at port (<Port number>).
Probable Cause Indicates a possible unstable link or faulty cable.
Recommended
Action
Verify that the small form-factor pluggable (SFP) and cable at the specified port are not faulty.
Replace the SPF and cable, if necessary.
Severity WARNING
ZONE-1042
Message <timestamp>, [ZONE-1042], <sequence-number>,, INFO, <system-name>, The effective
configuration has been disabled. <AD Id>.
Probable Cause Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
ZONE-1043
Message <timestamp>, [ZONE-1043], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to No Access.
Probable Cause Indicates that the Default Zone access mode is set to No Access.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO