Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

766 Fabric OS Message Reference
53-1002448-01
ZONE-1052
115
ZONE-1052
Message <timestamp>, [ZONE-1052], <sequence-number>,, INFO, <system-name>, The Interop
Default Zone state is set to enabled.
Probable Cause Indicates that the Interop Default Zone attribute state is enabled.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
ZONE-1053
Message <timestamp>, [ZONE-1053], <sequence-number>,, INFO, <system-name>, The Default
Zone state is set to Disabled.
Probable Cause Indicates that the Interop Default Zone attribute state is disabled.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
ZONE-1054
Message <timestamp>, [ZONE-1054], <sequence-number>,, WARNING, <system-name>, Default
Zone All Access mode is set with Frame Redirection zones.
Probable Cause Indicates that the Default Zone All Access mode will not grant all access behavior when the frame
redirection zones are defined.
Recommended
Action
Remove frame redirection zones or set the Default Zone access mode to No Access using the
defzone
--noaccess command.
Severity WARNING
ZONE-1055
Message <timestamp>, [ZONE-1055], <sequence-number>,, WARNING, <system-name>, McDATA
default zone enabled with Frame Redirection zones.
Probable Cause Indicates that frame redirection will not function properly with McDATA default zoning.
Recommended
Action
Remove frame redirection zones or disable McDATA default zoning.
Severity WARNING