Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

772 Fabric OS Message Reference
53-1002448-01
AG-1036
116
AG-1036
Message <Sequence Number> AUDIT, <timestamp>, [AG-1036], WARNING, CFG,
<event-initiator-details>, <event-location>, , Port <port> is connected to a
Non-Brocade fabric with Persistent ALPA enabled. Check the admin guide for
supported configuration .
Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric.
Recommended
Action
No action is required.
Severity WARNING
AG-1037
Message <Sequence Number> AUDIT, <timestamp>, [AG-1037], INFO, CFG,
<event-initiator-details>, <event-location>, , Trunked N_Port (<nport>) going
offline, if switchshow CLI for the connected fabric switch port displays
“Persistently disabled: Area has been acquired”, then check cabling: all trunked
ports should be in same ASIC Port Group.
Probable Cause Indicates that the cabling is incorrect.
Recommended
Action
If the switchshow command on the connected fabric switch port displays “Persistently disabled:
Area has been acquired”, then check the cabling on the Access Gateway. All trunked ports in a
single trunk should belong to the same application-specific integrated circuit (ASIC) port group.
Severity INFO