Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 789
53-1002448-01
Chapter
122
AUDIT CONF System Messages
CONF-1000
Message <Sequence Number> AUDIT, <timestamp>, [CONF-1000], INFO, CFG,
<event-initiator-details>, <event-location>, , configDownload completed
successfully. <Info about the parameters and AD>.
Probable Cause Indicates that the configDownload operation was initiated and completed successfully. The Info
about the parameters and AD variable is the description of the classes of configuration parameters
that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the
description.
Recommended
Action
No action is required.
Severity INFO
CONF-1020
Message <Sequence Number> AUDIT, <timestamp>, [CONF-1020], INFO, CFG,
<event-initiator-details>, <event-location>, , configDownload not permitted <AD
Number if AD is configured on the system>.
Probable Cause Indicates a configDownload operation is not permitted. There are several possible causes.
Recommended
Action
Execute the errShow command to view the error log. Correct the error and execute the
configDownload command again.
Severity INFO
CONF-1022
Message <Sequence Number> AUDIT, <timestamp>, [CONF-1022], WARNING, CFG,
<event-initiator-details>, <event-location>, , Downloading configuration without
disabling the switch was unsuccessful.
Probable Cause Indicates an attempt to download the configuration without disabling the switch was unsuccessful
because there are one or more parameters that require the switch to be disabled.
Recommended
Action
Disable the switch using the switchDisable command and download the configuration.
Severity WARNING