Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 863
53-1002448-01
SULB-1031
137
Recommended
Action
The firmwareDownload command will continue after the switch has rebooted. Run the
firmwareDownloadStatus command to monitor progress. If the problem persists, contact your
switch service provider.
Severity WARNING
SULB-1031
Message <Sequence Number> AUDIT, <timestamp>, [SULB-1031], WARNING, FIRMWARE,
<event-initiator-details>, <event-location>, , The switch is relocating an
internal firmware image.
Probable Cause Indicates the switch has rebooted with the new firmware and is relocating the AP firmware.
Recommended
Action
Wait for the operation to complete.
Severity WARNING
SULB-1032
Message <Sequence Number> AUDIT, <timestamp>, [SULB-1032], WARNING, FIRMWARE,
<event-initiator-details>, <event-location>, , Relocating an internal firmware
image on the CP.
Probable Cause Indicates the switch has started firmware download to the co-CPU.
Recommended
Action
Wait for the operation to complete.
Severity WARNING
SULB-1033
Message <Sequence Number> AUDIT, <timestamp>, [SULB-1033], WARNING, FIRMWARE,
<event-initiator-details>, <event-location>, , Switch has completed relocating
the internal firmware image.
Probable Cause Indicates the firmwareDownload process has completed on the switch.
Recommended
Action
Run the firmwareShow command to verify the firmware versions. Run the switchShow command to
make sure the switch is enabled.
Severity WARNING