Manualshelf

Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit
951952953954955956957958959960
866 Fabric OS Message Reference
53-1002448-01
SULB-1041
137
SULB-1041
Message <Sequence Number> AUDIT, <timestamp>, [SULB-1041], INFO, FIRMWARE,
<event-initiator-details>, <event-location>, , Firmware has been activated
successfully on standby CP.
Probable Cause Indicates the firmwareActivate command has completed successfully on standby CP.
Recommended
Action
No action is required. The firmwareActivate command has completed on standby CP as expected.
Run the firmwareShow command to verify the firmware versions.
Severity INFO
SULB-1042
Message <Sequence Number> AUDIT, <timestamp>, [SULB-1042], INFO, FIRMWARE,
<event-initiator-details>, <event-location>, , Firmwareactivate command has
completed successfully.
Probable Cause Indicates the firmwareActivate command has completed successfully and switch firmware has
been updated.
Recommended
Action
No action is required. The firmwareActivate command has completed as expected.
Run the firmwareShow command to verify the firmware versions.
Severity INFO