Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

ManualsBrandsHP ManualsComputer AccessoriesHP StoreFabric SN3000B/SN6000B 16Gb SAN Switch Accessory Kit

100

12 Fabric OS Message Reference

53-1002448-01

Changing the severity level of swEventTrap

To change the severity level of swEventTrap, perform the following steps.

1. Log in to the switch as admin.

2. Execute the snmpConfig

--set mibCapability command to configure MIBs interactively. All the

supported MIBs and associated traps are displayed. You can change the DesiredSeverity for

swEventTrap to 1 (Critical), 2 (Error), 3 (Warning), or 4 (Informational). The default value is 0.

switch:admin> snmpconfig --set mibcapability

FE-MIB: YES

SW-MIB: YES

FA-MIB: YES

FICON-MIB: YES

HA-MIB: YES

FCIP-MIB: YES

ISCSI-MIB: YES

IF-MIB: YES

BD-MIB: YES

SW-TRAP: YES

swFault: YES

swSensorScn: YES

swFCPortScn: YES

swEventTrap: YES

DesiredSeverity:Informational

swFabricWatchTrap: YES

DesiredSeverity:None

swTrackChangesTrap: YES

swIPv6ChangeTrap: YES

swPmgrEventTrap: YES

swFabricReconfigTrap: YES

swFabricSegmentTrap: YES

swExtTrap: NO

swStateChangeTrap: NO

swPortMoveTrap: NO

swBrcdGenericTrap: YES

FA-TRAP: YES

connUnitStatusChange: YES

connUnitDeletedTrap: YES

connUnitEventTrap: YES

connUnitSensorStatusChange: YES

connUnitPortStatusChange: YES

FICON-TRAP: YES

linkRNIDDeviceRegistration: YES

linkRNIDDeviceDeRegistration: YES

linkLIRRListenerAdded: YES

linkLIRRListenerRemoved: YES

linkRLIRFailureIncident: YES

HA-TRAP: YES

fruStatusChanged: YES

cpStatusChanged: YES

fruHistoryTrap: YES

ISCSI-TRAP: YES

iscsiTgtLoginFailure: YES

iscsiIntrLoginFailure: YES

iscsiInstSessionFailure: YES

IF-TRAP: YES

linkDown: YES

linkUp: YES

BD-TRAP: YES

bdTrap: YES