HP B-series Network Advisor Enterprise, Professional Plus, and Professional 11.1.5 Release Notes (5697-2464, January 2013)

Table 7 HP Network Advisor 11.1.0 closed defects (continued)
SolutionClosed fixes summary
Fixed in HP Network Advisor 11.1.0.Remote VE_Port WWN is shown as missing and with a red icon under end
devices.
Fixed in HP Network Advisor 11.1.0.Fault Management – “VFID” is shown as “Chassis” for “Switch name change
event” in the master log.
Fixed in HP Network Advisor 11.1.0.There are yellow dotted lines shown between the segmented switch and
the End Device in the re-discovered fabric.
Fixed in HP Network Advisor 11.1.0.In the Client, IFL/ISL connections are not being displayed correctly in the
topology view when multiple circuits are added with different GigE ports
for a tunnel.
Fixed in HP Network Advisor 11.1.0.For zoning, sorting of ports is not accurate in the Hex display mode for the
user port number.
Fixed in HP Network Advisor 11.1.0.In the Client, the latest topology changes are not reflected; the yellow dotted
line is not shown when the tunnel is deleted.
Fixed in HP Network Advisor 11.1.0.In the Device Tree, on selecting an E_Port on switch1, after 1 minute focus
changes to the same port under switch-2, and is misleading to the user.
Fixed in HP Network Advisor 11.1.0.When a user attempts to delete a logical switch the operation may fail with
the error message internal server error.
Workaround prior to upgrade: Close and
reopen the circuit dialog on different
circuits to perform the edit operation.
A user is unable to edit the commit rate of a second circuit after the first
circuit has been modified without closing and reopening the FCIP Tunnel
dialog box.
Fixed in HP Network Advisor 11.1.0.
Fixed in HP Network Advisor 11.1.0.In the Client, the Logical Switch Sequence Number is displayed incorrectly
in the Switch Properties Dialog.
Fixed in HP Network Advisor 11.1.0.In Port Fencing, Switch-level Alert was missing when a port is fenced for
Link reset violation type.
Workaround prior to upgrade: Change
commit rates on both the local and remote
FCIP Circuits do not come up and stay in an 'In progress' state after
changing the commit rate.
ends separately through the CLI if there
are different VLAN tags at both ends.
Fixed in HP Network Advisor 11.1.0.
Workaround prior to upgrade: Hit the
refresh button in the target dialog to see
the hosts configured.
At times hosts are not displayed and a user will not be able to view the
LUNs configured for a container.
Fixed in HP Network Advisor 11.1.0.
Workaround prior to upgrade: Add syslog
registration via the CLI.
Syslog registration fails for HP StorageWorks 4/32B SAN Switches with
a McDATA OUI 08:00:88
Fixed in HP Network Advisor 11.1.0.
Fixed in HP Network Advisor 11.1.0.Encryption HAC Failover status not displayed.
Fixed in HP Network Advisor 11.1.0.Decommissioning a LUN in an Encryption Group (EG) that is configured
with TKLM returns an error message that is invisible to the user.
Workaround prior to upgrade: Configure
valid IP addresses for all switches in the
fabric.
Unable to discover fabric in DCFM if IP address of any member switch is
0.0.0.0.
Fixed in HP Network Advisor 11.1.0.
Workaround prior to upgrade: Login as
system administrator.
A user is unable to invoke the patch install dialog from DCFM 10.4.3 when
logged in as a user with admin privileges.
Fixed in HP Network Advisor 11.1.0.
Migration and upgrades 19