Brocade Fabric OS Documentation Updates - Supporting Fabric OS v7.0.x (53-1002165-05, March 2012)

Fabric OS Documentation Updates 5
53-1002165-05
Chapter
3
Fabric OS Administrator’s Guide
In this chapter
•Documentation updates for Fabric OS v7.0.0 and later . . . . . . . . . . . . . . . . . 5
•Documentation updates for Fabric OS v7.0.1 and later . . . . . . . . . . . . . . . . . 6
Documentation updates for Fabric OS v7.0.0 and later
The updates in this section are for the Fabric OS Administrator’s Guide, publication number
53-1002148-03, published July 2011.
Chapter 22, Managing Long Distance Fabrics
Under the heading of “Configuring an extended ISL” on page 451, in step 3, change the default
value of R_A_TOV from 1000 to 10000.
Under the heading of “Buffer credits for each switch model” on page 458, change the first
paragraph to the following:
Table 78 shows the total ports in a switch or blade, number of user ports in a port group, and
the unreserved buffer credits available per port group. The number in the Unreserved buffers
column is the number with QoS enabled. This number is higher if QoS is not enabled.
In Table 78, “Buffer credits” on page 458, change the name of the last column to “Unreserved
buffers (per port group) with QoS enabled”.
In Table 79, “Configurable distances for Extended Fabrics” on page 460, change the values for the
Brocade 6510, FC16-32, and FC16-48 to the following:
TABLE 79 Configurable distances for Extended Fabrics
Maximum distances (km) that can be configured assuming 2112 Byte Frame Size
Switch/blade model 1 Gbps 2 Gbps 4 Gbps 8 Gbps 10 Gbps 16 Gbps
6510 N/A 6754 3377 1688 1350 844
FC16-32 N/A 5190 2595 1297 1038 648
FC16-48 N/A 4486 2243 1121 897 560