Brocade Fabric OS Documentation Updates - Supporting Fabric OS v7.0.x (53-1002165-05, March 2012)

8 Fabric OS Documentation Updates
53-1002165-05
rtLogTrace
4
Displays the number of times that the port lost single VC_RDY primitive signal or
a single frame.
er_multi_credit_loss
Displays the number of times that the port lost multiple VC_RDY primitive signals
or multiple frames
To display the port statistics on the Brocade 5610:
switch:admin> portstatsshow 0
stat_wtx 635621 4-byte words transmitted
stat_wrx 386290 4-byte words received
stat_ftx 31573 Frames transmitted
stat_frx 27373 Frames received
stat_c2_frx 0 Class 2 frames received
stat_c3_frx 0 Class 3 frames received
stat_lc_rx 13678 Link control frames received
stat_mc_rx 0 Multicast frames received
stat_mc_to 0 Multicast timeouts
stat_mc_tx 0 Multicast frames transmitted
tim_rdy_pri 0 Time R_RDY high priority
tim_txcrd_z 62084 Time TX Credit Zero (2.5Us ticks)
tim_txcrd_z_vc 0- 3: 62084 0 0 0
tim_txcrd_z_vc 4- 7: 0 0 0 0
tim_txcrd_z_vc 8-11: 0 0 0 0
tim_txcrd_z_vc 12-15: 0 0 0 0
er_enc_in 0 Encoding errors inside of frames
er_crc 0 Frames with CRC errors
er_trunc 0 Frames shorter than minimum
er_toolong 0 Frames longer than maximum
er_bad_eof 0 Frames with bad end-of-frame
er_enc_out 8336 Encoding error outside of frames
er_enc_pcs_err 0 pcs error
er_bad_os 6 Invalid ordered set
er_rx_c3_timeout 0 Class 3 receive frames discarded due to timeout
er_tx_c3_timeout 0 Class 3 transmit frames discarded due to
timeout
er_unroutable 17 Frames that are unroutable
er_unreachable 0 Frames with unreachable destination
er_other_discard 0 Other discards
er_type1_miss 0 frames with FTB type 1 miss
er_type2_miss 0 frames with FTB type 2 miss
er_type6_miss 0 frames with FTB type 6 miss
er_zone_miss 0 frames with hard zoning miss
er_lun_zone_miss 0 frames with LUN zoning miss
er_crc_good_eof 0 Crc error with good eof
er_inv_arb 0 Invalid ARB
er_single_credit_loss 0 Single vcrdy/frame loss on link
er_multi_credit_loss 0 Multiple vcrdy/frame loss on link
rtLogTrace
The statement on page 877 regarding the persistence of the rtLogTrance configuration is incorrect. It
should read: "The RTLog is enabled by default and persistent across reboots. The rtLogTrace
configuration is lost after a power cycle."