Brocade Fabric OS FCIP Administrator's Guide v7.1.0 (53-1002748-01, March 2013)
Fabric OS FCIP Administrator’s Guide 7
53-1002748-01
7800 switch license options
2
7800 switch license options
Some of the capabilities of the Brocade 7800 switch require the following feature licenses, as
described in Table 2.
• The Advanced FICON Acceleration License enables all FICON emulation features:
- FICON Tape Read Pipelining
- FICON Tape Write Pipelining
- FICON IBM z/OS Global Mirror (formerly eXtended Remote Copy or XRC) Emulation
- FICON Teradata Emulation
- FICON Printer Emulation
• The Integrated Routing (IR) License is required to configure EX_Ports and VEX_Ports to support
Fibre Channel Routing (FCR).
NOTE
FCR is not supported on a 7800 switch that has been partitioned for virtual fabrics.
Refer to the chapter on administering licensing in the Brocade Fabric OS Administrator’s Guide for
complete information about licensing requirements.
TABLE 2 7800 FCIP feature licenses
Feature Purpose License (licenseShow output)
7800 upgrade Enables full hardware
capabilities, full FCIP tunnel
capabilities, and support of open
systems tape pipelining (OSTP).
1
1. Reboot of 7800 is required after activating the 7800 upgrade license.
7800 Upgrade license
Advanced FICON acceleration Enables accelerated tape
read/write and IBM z/OS Global
Mirror, Teradata, and printer
emulation features in FICON
environments.
Advanced FICON Acceleration (FTR_AFA)
license
Integrated routing (IR) Required to configure EX_Ports
and VEX_Ports to support Fibre
Channel Routing (FCR).
Integrated Routing license
Advanced Extension License Required for multiple-circuit
tunnels, FCIP Trunking and
Adaptive Rate Limiting (ARL).
Advanced Extension (FTR_AE) license