Brocade Fabric OS FCIP Administrator's Guide v7.1.0 (53-1002748-01, March 2013)

Fabric OS FCIP Administrator’s Guide 53
53-1002748-01
Creating a multicircuit tunnel (example)
2
Site B
portcfg fcipcircuit 16 create 0 192.168.0.63 192.168.0.64 -b 1000000 -B
1000000
portcfg fcipcircuit 16 create 1 192.168.1.63 192.168.1.64 -b 1000000 -B
1000000
portcfg fcipcircuit 16 create 2 192.168.2.63 192.168.2.64 -b 1000000 -B
1000000
portcfg fcipcircuit 16 create 3 192.168.3.63 192.168.3.64 -b 1000000 -B
1000000
portcfg fcipcircuit 16 create 4 192.168.4.63 192.168.4.64 -b 1000000 -B
1000000
portcfg fcipcircuit 16 create 5 192.168.5.63 192.168.5.64 -b 1000000 -B
1000000
4. To display the results of creating the tunnel and circuits from the preceding steps, use the
portshow fciptunnel all -c command. Tunnel status for Site A and Site B displays the same.
portshow fciptunnel all -c
switch63:root> portshow fciptunnel all -c
-----------------------------------------------------------------------------
--
Tunnel Circuit OpStatus Flags Uptime TxMBps RxMBps ConnCnt CommRt Met
-----------------------------------------------------------------------------
--
16 - Up c------ 4m22s 0.00 0.00 1 - -
16 0 ge0 Up ---4--s 4m22s 0.00 0.00 1 1000/1000 0
16 1 ge1 Up ---4--s 4m12s 0.00 0.00 1 1000/1000 0
16 2 ge2 Up ---4--s 4m2s 0.00 0.00 1 1000/1000 0
16 3 ge3 Up ---4--s 3m50s 0.00 0.00 1 1000/1000 0
16 4 ge4 Up ---4--s 3m34s 0.00 0.00 1 1000/1000 0
16 5 ge5 Up ---4--s 2m10s 0.00 0.00 1 1000/1000 0
-----------------------------------------------------------------------------
--
Flags: tunnel: c=compression m=moderate compression a=aggressive compression
A=Auto compression f=fastwrite t=Tapepipelining F=FICON
T=TPerf i=IPSec l=IPSec Legacy
Flags: circuit: s=sack v=VLAN Tagged x=crossport 4=IPv4 6=IPv6
L=Listener I=Initiator