Brocade Fabric OS FCIP Administrator's Guide v7.1.0 (53-1002748-01, March 2013)

Fabric OS FCIP Administrator’s Guide 69

53-1002748-01

Portshow command usage

Use the portshow command to display port operational information on Brocade 7800 switches,

and FX8-24 blades. The Fabric OS Command Reference Manual provides complete descriptions of

portshow command syntax and options. The following sections identify a few specific outputs that

may be useful for maintenance and troubleshooting.

Displaying IP interfaces

The following example displays IP interface information for a 7800 switch.

switch:admin> portshow ipif ge0

The following example displays IP interface information for a FX8-24 blade:

switch:admin> portshow ipif 1/xge0

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying IP routes

The following example displays IP route information for a 7800 switch.

switch:admin> portshow iproute ge5

The following example displays IP route information for a FX8-24 blade:

switch:admin> portshow iproute 1/xge0

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying FCIP tunnel information

The following example of the portshow fciptunnel command is used most often to determine FCIP

tunnel status.

switch:admin> portshow fciptunnel all -c

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying IP addresses

You can display IP addresses configured for specific circuits using the ip-address option with the

circuit option as in the following example.

switch:admin> portshow fciptunnel all --circuit --ip-address

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.