Brocade Fabric OS FCIP Administrator's Guide v7.1.0 (53-1002748-01, March 2013)

Fabric OS FCIP Administrator’s Guide 71

53-1002748-01

Portshow command usage

Displaying FCIP tunnel performance

The following example will display performance statistics for tunnel associated with port 17 on a

7800 switch.

switch:admin> portshow fciptunnel 17 --perf

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying FCIP tunnel TCP statistics

The following example will display TCP connections for a tunnel associated with port 17 on a 7800

switch.

switch:admin>portshow fciptunnel 17 -c --tcp

You can reset statistics counters to zero to display only new statistics with the --tcp option from the

time you issue the reset using the following command.

switch:admin>portshow fciptunnel 17 -c --tcp --reset

You can display the entire lifetime of statistics for the tunnel using the following command. The

time basis for the statistics will display in the output.

switch:admin>portshow fciptunnel 17 -c --tcp --lifetime

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying FCIP circuits

The following example will display all FCIP circuit information for a 7800 switch or FX8-24 blade.

switch:admin> portshow fcipcircuit all

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying a single circuit

The following example will display information for circuit 1 on tunnel 16 of a 7800 switch.

switch:admin> portshow fcipcircuit 16 1

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.