Brocade Fabric OS FCIP Administrator's Guide v7.1.0 (53-1002748-01, March 2013)

72 Fabric OS FCIP Administrator’s Guide

53-1002748-01

Portshow command usage

Displaying TCP statistics for circuits

The following example displays TCP statistics for circuits associated with VE_Port 12 of a FX8-24

blade.

switch:admin>portshow fcipcircuit 3/12 --tcp

You can reset statistics counters to zero to display only new statistics with the --tcp option from the

time you issue the reset using the following command.

switch:admin>portshow fcipcircuit 3/12 -tcp --reset

You can display the entire lifetime of statistics for the circuit using the following command. The time

basis for the statistics will display in the output.

switch:admin>portshow fcipcircuit 3/12 -tcp --lifetime

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying FCIP circuit performance

The following example will display FCIP circuit performance information for circuit 1 on tunnel 20.

switch:admin> portshow fcipcircuit 20 1 --perf

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying QoS prioritization for a circuit

The following example will display QoS prioritization for a FCIP circuit 1 on tunnel 20 of a 7800

switch.

switch:admin> portshow fcipcircuit 20 1 --perf --qos

For details of command syntax and output examples, refer to the Fabric OS Command Reference

Manual.

Displaying FCIP tunnel information (FX8-24 blade)

You can use the portShow fcipTunnel command to view the performance statistics and monitor the

behavior of an online FCIP tunnel. The command syntax is as follows.

portShow fciptunnel slot/ve_port all|tunnel ID -perf

The following example shows the portShow fcipTunnel with the -perf option to display performance

characteristics of tunnels associated with port 12.

switch:admin06> portshow fciptunnel 8/12 all —perf

The following example shows the portShow fcipTunnel with the circuit option to display FCIP circuits

of tunnel 0:

switch:admin06> portshow fciptunnel 8/12 0 —c