Manualshelf

Brocade Web Tools Administrator's Guide v7.1.0 (53-1002756-01, March 2013)

ManualsBrandsHP ManualsStorageHP StoreFabric SN6500B 16Gb 96/48 Port Side Air Intake Fibre Channel Switch
101102103104105106107108109110
Web Tools Administrator’s Guide 79
53-1002756-01
Configuring port octet speed combination
5
NOTE
For FC8-32E and FC8-48E port blades, the port octet speed combination is Auto or Fixed
8G|4G|2G.
You can change the octet combination for the octet associated with first eight ports of a blade or
switch. The first eight ports are based on the slot port number (or user port number in case of the
Brocade 6510 or Brocade 6520). The octet speed must be set consistently across all members of
the port octet.
NOTE
Changing from one combination to another is disruptive operation. It may cause connected ports to
become No_Sync. The 10 GE license is required in order to set a port to speed 10G.
To configure the Port Octet Speed Combination, perform the following steps.
1. Select the Port Admin tab.
2. Select View > Advanced mode.
3. Select the FC Ports tab.
4. In the FC Ports Explorer, select a port to configure.
FIGURE 18 FC Explorer dialog
5. Click Speed Combination.
The Port Octet Speed Combination dialog displays.
FIGURE 19 Port Octet Speed Combination dialog
6. Select a Speed Combination and click OK.