Brocade Web Tools Administrator's Guide v7.1.0 (53-1002756-01, March 2013)

84 Web Tools Administrator’s Guide

53-1002756-01

GigE port modes

Web Tools allows you to set the GigE port mode for the FX8-24 DCX Extension Blades to 1G, 10G, or

dual modes.

To configure the GigE port mode, perform the following steps:

NOTE

You must install the FX8-24 DCX Extension Blade in a slot containing 10GE license to configure the

mode.

1. Select Port Admin > GigE Ports.

2. Select View > Advanced.

3. Select a slot from the GigE Ports Explorer panel.

The Mode drop-down button gets enabled.

4. Select one of the following modes from the Mode drop-down button.

- 1G - To enable ge0 through ge9 ports.

- 10G - To enable xge0 and xge1 ports.

- Dual - To enable ge0 through ge09 and xge0 ports.

5. Click Yes on the confirmation dialog box.