Brocade Web Tools Administrator's Guide v7.1.0 (53-1002756-01, March 2013)

106 Web Tools Administrator’s Guide

53-1002756-01

Zoning management

FIGURE 24 Zone Administration window

ATTENTION

Any changes you make in the Zone Administration window are held in a buffered environment and

are not updated in the zoning database until you save the changes. If you close the Zone

Administration window without saving your changes, your changes are lost. To save the buffered

changes you make in the Zone Administration window to the zoning database on the switch, refer to

“Saving local zoning changes” on page 108.

Note the following:

• “Saving” means updating the zoning database on the switch with the local changes from the

Web Tools buffer.

• “Refreshing” means copying the current state of the zoning database on the switch to the Web

Tools buffer, overwriting its current contents.

In the Zone Administration window, all WWNs also display vendor names.

The Member Selection List only lists the ports of the current switch and the devices of all the

switches in the fabric. Slot and port information of other switches are not displayed in the tree.

Click the Alias tab to display which aliases the port or device is a member of. Also, you can

right-click the device nodes and click View Device Detail to display detailed information about the

selected device.