Brocade Web Tools Administrator's Guide v7.1.0 (53-1002756-01, March 2013)

Web Tools Administrator’s Guide 209
53-1002756-01
Allow / Prohibit Matrix configuration
16
FIGURE 45 Allow / Prohibit Matrix Configuration dialog box
Activating an Allow / Prohibit Matrix configuration
When you activate a saved Allow / Prohibit Matrix configuration on the switch, the preceding
configuration (currently activated) is overwritten.
To activate an Allow / Prohibit Matrix configuration, perform the following steps.
1. Open theAllow / Prohibit Matrix configuration list.
2. Select the saved configuration from the list.
3. Click Activate.
The Activate Allow / Prohibit Matrix Configuration confirmation dialog box displays. The
message reminds you that the current configuration will be overwritten upon activation.
4. Optional: Click Active=Saved Mode to enable (selected) or disable (not selected) the
Active=Saved FMS parameter after the configuration is activated.
5. Click Yes to activate the configuration or click No to cancel the activation.
Copying an Allow / Prohibit Matrix configuration
To copy an Allow / Prohibit Matrix configuration to a new configuration, perform the following steps.
1. Display the Allow / Prohibit Matrix configuration list.
2. Select a saved configuration or the active configuration from the list.