Brocade Fabric OS v7.2.1 Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1 Release Notes v1.0 Page 33 of 49
Defect ID:
DEFECT000454580
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Security
Reported In Release:
FOS6.4.2
Technology Area:
Fabric Authentication
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
With SSL configured on Active CP, a newly inserted Standby CP may panic and go through an
unnecessary additional reboot.
Condition:
When SSL configured in the active CP, inserting a new standby CP whose time is later than that of
Active CP & don't have SSL configured already can cause a panic & unnecessary additional reboot of
standby CP after insertion.
Workaround:
Insert standby CP with hadisabled state. Login to standby CP, change standby CP's date to earlier
than that of the active CP using "/bin/date" command and then execute haEnable.
Recovery:
No action required. Previous switch reboot will fix the SSL configuration issue.
Defect ID:
DEFECT000455170
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.1.0
Technology Area:
CLI
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
On a switch without license, while changing the date using "date" command will display: "No
licenses installed." Even though date properly updated by the command.
Condition:
Executing "date" command in a switch without license will throw message "No licenses installed".
Workaround:
Issue is cosmetic. unnecessary message can be ignored.
Recovery:
No recovery applicable. issue is cosmetic.
Defect ID:
DEFECT000458552
Technical Severity:
Medium
Probability:
Medium
Product:
FOS
Technology:
Monitoring/RAS
Reported In Release:
FOS7.0.1
Technology Area:
Port Log
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
Log entry in the portlogdump doesn’t align properly with the rest of the columns.
Condition:
Zone entry not aligned properly between port , cmd and argument/payload value.
Defect ID:
DEFECT000460977
Technical Severity:
Medium
Probability:
Medium
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.2.0
Technology Area:
CLI
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
User can't execute switchcfgtrunk CLI in AG mode.
It gives following error while executing the CLI:
Error: This command is not supported in AG mode
Condition:
switchcfgtrunkport CLI is blocked in AG mode through RBAC permission check.
Workaround:
Trunking can be disabled or enabled on the ports in AG using portcfgtrunkport CLI.
Recovery:
Ports will be recovered from this state using portcfgtrunkport CLI.