Brocade Fabric OS v7.2.1 Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1 Release Notes v1.0 Page 35 of 49
Defect ID:
DEFECT000466240
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.1.0
Technology Area:
NTP - Network Time Protocol
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
Switch reboots when using the tsclockserver command to set NTP with a DNS name longer than 32
characters
Condition:
tsclockserver command accepts list of NTP server address and switch reboot occurs when the NTP
address with more than 32 characters is located at any position other than last in input NTP server
address list.
Workaround:
Use IP address(IPV4) or DNS name with less than 32 characters to configure tsclockserver.
Recovery:
Switch will recover after reboot.
Defect ID:
DEFECT000466833
Technical Severity:
High
Probability:
Medium
Product:
FOS
Technology:
Traffic Management
Reported In Release:
FOS6.4.3
Technology Area:
FC-FC routing
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
A 3rd party vendor device using 0x0000 as RXID instead of the standard default 0xffff cannot
communicate with switch.
Condition:
If a vendor device uses 0x0000 as RXID of the frame instead of 0xffff during the initialization of
exchange the frames will be rejected.
Defect ID:
DEFECT000467051
Technical Severity:
Medium
Probability:
High
Product:
FOS
Technology:
Monitoring/RAS
Reported In Release:
FOS7.0.2
Technology Area:
Fabric Watch
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
switchstatuspolicy shows incorrect port count which may impact the accuracy of switch status
Condition:
switchstatuspolicy incorrectly accounts for logical ports into the total physical port count.
Defect ID:
DEFECT000467204
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.0.0_pha
Technology Area:
SNMPv2, SNMPv3 & MIBs
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
SNMPV3 user entries are not cleared when CMM executes restore default.
Condition:
Applicable only for embedded BR6547 platform
Workaround:
Default to snmpv3 configuration with "snmpconfig --default snmpv3" command.
Defect ID:
DEFECT000467965
Technical Severity:
Medium
Probability:
Medium
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.2.0
Technology Area:
Web Tools
Closed In Release(s):
FOS7.2.1(Fixed)
Symptom:
Seed switch with lower versions (pre-v7.2.0) of Webtools, will incorrectly display switches running
MAPS as "blue" and unknown.
Condition:
A fabric having seed switch running FOS version lower than V7.2.0 and checking for Switch Health
in Webtools