Brocade Fabric OS v7.2.1 Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1 Release Notes v1.0 Page 43 of 49
Defect ID:
DEFECT000464907
Technical Severity:
High
Summary:
Misbehaving device cause switch to panic
Symptom:
During a period of time, device sends switch non-stop 0 sized ELS frames. These 0 sized frames were
not properly checked and freed, and eventually the switch panics after running of memory.
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
Panic / OOM
Reported In Release:
FOS6.1.0_utah
Service Request ID:
1192317
Defect ID:
DEFECT000465730
Technical Severity:
Medium
Summary:
Update asic parity error monitoring threshold and behavior.
Symptom:
Default threshold for low level Asic parity error will fault blade with a few error. New CLI options to
"chassiscfgperrthr" will allow customers to adjust the values based on their environments.
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000465802
Technical Severity:
Medium
Summary:
Webtools does not allow the configuration of the "Signal Loss" area for ports
Symptom:
Customer is unable to see “signal loss” area stats via Webtools while the same can be seen from CLI
Risk of Fix:
Low
Probability:
Medium
Feature:
FOS Software
Function:
Web Management
Reported In Release:
FOS7.1.1
Service Request ID:
1190629
Defect ID:
DEFECT000465879
Technical Severity:
High
Summary:
16Gb SFP rules for TXP and SFP Current are violated when a neighbor EPort transitions online.
Symptom:
Invalid reporting of MAPS 16G SFP rules for optic when its neighbor EPort transitions online.
Risk of Fix:
High
Probability:
High
Feature:
Advanced Monitoring Services
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000466750
Technical Severity:
Medium
Summary:
Misleading last updated time in Switch Events and Switch Information tab.
Symptom:
In Switch Events and Switch information tab, the last updated time shows the Host time instead of
showing the Switch time.
Risk of Fix:
High
Probability:
Low
Feature:
WebMgmt
Function:
Switch Explorer/Switch View
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000466943
Technical Severity:
Medium
Summary:
After a very fast portdisable/portenable test sequence in a script, the port no longer sends or receives
traffic
Symptom:
If a port is enabled and then disabled within about 1 second, the next time it is enabled the port may
not be able to pass traffic.
Workaround:
Allow two seconds between port enables and port disables.
Risk of Fix:
Low
Probability:
Low
Feature:
8G ASIC Driver
Function:
Routing
Reported In Release:
FOS7.0.2
Service Request ID:
1195567