Brocade Fabric OS v7.2.1 Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.1
Fabric OS v7.2.1 Release Notes v1.0 Page 48 of 49
Defect ID:
DEFECT000473063
Technical Severity:
High
Summary:
SIM ports stuck as G-port when changing a logical switch to a base switch
Symptom:
Ports that are configured as SIM ports in a logical switch are get stuck in an invalid state when the
logical switch is reconfigured as Base switch
Workaround:
Remove configured SIM ports before converting logical switch to base switch
Risk of Fix:
Low
Probability:
Medium
Feature:
Network Patroller
Function:
ASIC interfaces
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000473548
Technical Severity:
High
Summary:
When flows are monitored in MAPS, switch disable/enable or port enable/disable could trigger
unexpected MAPS RASLOGs
Symptom:
Unexpected MAPS RASLOGs with large values are triggered for the flows affected by port
enable/disable or switch enable/disable operations.
Risk of Fix:
Low
Probability:
High
Feature:
Advanced Monitoring Services
Function:
Flows
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000473940
Technical Severity:
High
Summary:
C2-1013 Duplicate rte_tbl_select detected! observered after upgrade.
Symptom:
After upgrading from v6.4.3b to v7.0.2c several ports observed C2-1013 (Duplicate rte_tbl_select
detected!) messages.
Workaround:
None currently.
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.0.2
Service Request ID:
1225833
Defect ID:
DEFECT000473948
Technical Severity:
High
Summary:
Using BNA to distribute a modified MAPS policy across a fabric of switches and director chassis fails
with a generic error message “'failed to create policy”
Symptom:
Attempt to distribute modified MAPS policy fails with a generic error message that can’t be used for
correcting the problem
Risk of Fix:
Low
Probability:
Medium
Feature:
Mgmt Embedded - CAL
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000474234
Technical Severity:
Medium
Summary:
Multiple aborted FICON sequences after processing emulated attention in zOS third party remote
mirror
Symptom:
Third party remote mirror does successfully configure but FICN-1062 and FICN-1063 RASLOG
messages and associated XTUN-1999 FTRACE messages and zOS IOS000 errors are recorded in
SYSLOG
Risk of Fix:
Low
Probability:
Low
Feature:
FCIP
Function:
FCIP-RAS
Reported In Release:
FOS7.1.0
Service Request ID:
1226196