Brocade Network Advisor SAN Installation and Migration Guide v12.0.0 (53-1002801-01, March 2013)

Network Advisor SAN Installation and Migration Guide 21

53-1002801-01

Accessing the Network Advisor interfaces

Launching the SMC on Linux

NOTE

The Server Management Console is a graphical user interface and should be launched from the

XConsole on Linux systems.

1. On the Network Advisor server, go to the following directory:

Install_Directory/bin

2. Type the following at the command line:

./smc

sh smc

Launching the SMIA Configuration Tool

1. Launch the Server Management Console from the Start menu.

2. Click Configure SMI Agent.

The SMIA Configuration Tool Log In dialog box displays.

3. Enter your user name and password.

The defaults are Administrator and password, respectively.

4. Click Login.

Launching the SMIA Configuration Tool remote client

The remote client requires Oracle JRE 1.7.0_09. For the website listing patch information, go to

http://www.oracle.com/technetwork/java/javase/downloads/index.html.

1. Open a web browser and enter the IP address of the Network Advisor server in the Address bar.

If the web server port number does not use the default (5989 if is SSL Enabled; otherwise, the

default is 5988), you must enter the web server port number in addition to the IP address. For

example, IP_Address:Port_Number.

The Network Advisor web start screen displays.

2. Click the SMIA Configuration Tool web start link.

The SMIA Configuration Tool Log In dialog box displays.

3. Enter your user name and password.

The defaults are Administrator and password, respectively.

4. Select or clear the Save password check box to choose whether you want the application to

remember your password the next time you log in.

5. Click Login.

The SMIA Configuration Tool displays.