Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(4) (OL-14116-12, July 2009)
Table Of Contents
- Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(4)
- Contents
- Introduction
- Components Supported
- Software Download Process
- Determining the Software Version
- Downloading Software
- Selecting the Correct Software Image for an MDS 9100 Series Switch
- Selecting the Correct Software Image for an MDS 9200 Series Switch
- Selecting the Correct Software Image for an MDS 9500 Series Switch
- Migrating from Supervisor-1 Modules to Supervisor-2 Modules
- Configuring Generation 2 Switching Modules
- Upgrading Your Cisco MDS SAN-OS Software Image
- Upgrading Your Version of Cisco Fabric Manager
- General Upgrading Guidelines
- FICON Supported Releases and Upgrade Paths
- Upgrading with IVR Enabled
- Reconfiguring SSM Ports Before Upgrading to SAN-OS Release 3.3(4)
- Upgrading the SSI Image on Your SSM
- Upgrading a Switch with Insufficient Space for Two Images on the Bootflash
- Upgrading a Cisco MDS 9124 Switch
- Performing a Disruptive Upgrade on a Single Supervisor MDS Family Switch
- Upgrading an MDS 9222i Switch
- Downgrading Your Cisco MDS SAN-OS Software Image
- New Features in Cisco MDS SAN-OS Release 3.3(4)
- Limitations and Restrictions
- Upgrading to Recover Loss of Performance Manager Data
- Maximum Number of Zones Supported in Interop Mode 4
- Upgrading the SAN-OS Software on the MDS 9222i Switch
- Java Web Start
- Cisco Storage Media Encryption
- Cisco MDS 9222i Module Upgrade
- SANTap
- Deleting SANTap Configurations Is Required Before Downgrade
- FCIP Interoperability
- Applying Zone Configurations to VSAN 1
- Running Storage Applications on the MSM-18/4
- Compatibility of Fabric Manager and Data Mobility Manager
- A Supervisor-2 Module Might Reset in Switches Running SAN-OS Release 3.2(x)
- Limited ISSU Support on the MDS 9222i Switch
- Caveats
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
Send documentation comments to mdsfeedback-doc@cisco.com
6
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(4)
OL-14116-12
Components Supported
LC-type
fiber-optic
SFP
DS-SFP-FC-2G-SW 2-Gbps/1-Gbps Fibre Channel—short wavelength SFP. MDS 9000 Family
DS-SFP-FC-2G-LW 2-Gbps/1-Gbps Fibre Channel—long wavelength SFP.
DS-SFP-FCGE-SW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre
Channel—short wavelength SFP.
DS-SFP-FCGE-LW 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel—long
wavelength SFP.
DS-SFP-GE-T 1-Gbps Ethernet SFP.
DS-SFP-FC4G-SW 4-Gbps/2-Gbps/1-Gbps Fibre Channel—short wavelength
SFP for DS-X91xx switching modules.
MDS 9500 Series and
9200 Series, except for
the MDS 9216 Switch
DS-SFP-FC4G-MR 4-Gbps/2-Gbps/1-Gbps Fibre Channel—long wavelength
SFP for DS-X91xx switching modules only. Supports
distances up to 4 km.
DS-SFP-FC4G-LW 4-Gbps/2-Gbps/1-Gbps Fibre Channel—long wavelength
SFP for DS-X91xx switching modules only. Supports
distances up to 10 km.
CWDM
2
DS-CWDM-xxxx Gigabit Ethernet and 1-Gbps/2-Gbps/4-Gbps Fibre
Channel SFP LC interface xxxx nm, where xxxx = 1470,
1490, 1510, 1530, 1550, 1570, 1590, or 1610 nm.
MDS 9000 Family
DS-CWDM-MUX-4 Add/drop multiplexer for four CWDM wavelengths.
DS-CWDM-MUX-8 Add/drop multiplexer for eight CWDM wavelengths.
DS-CWDMCHASSIS Two slot chassis for CWDM add/drop multiplexers.
Power
supplies
DS-CAC-6000W 6000-W AC power supply. MDS 9513 only
DS-CAC-2500W 2500-W AC power supply. MDS 9509 only
DS-CDC-2500W 2500-W DC power supply.
DS-CAC-3000W 3000-W AC power supply.
DS-CAC-4000W-US 4000-W AC power supply for US (cable attached).
DS-CAC-4000W-INT 4000-W AC power supply international (cable attached).
DS-CAC-1900W 1900-W AC power supply. MDS 9506 only
DS-CDC-1900W 1900-W DC power supply.
DS-CAC-845W 845-W AC power supply. MDS 9200 Series only
DS-CAC-300W 300-W
3
AC power supply. MDS 9100 Series only
CompactFlash MEM-MDS-FLD51M MDS 9500 supervisor CompactFlash disk, 512 MB. MDS 9500 Series only
Port analyzer
adapter
DS-PAA-2, DS-PAA A standalone Fibre Channel-to-Ethernet adapter that
allows for simple, transparent analysis of Fibre Channel
traffic in a switched fabric.
MDS 9000 Family
CD-ROM M90FMK9-CD322= MDS 9000 Management Software and Documentation
CD-ROM, spare.
MDS 9000 Family
1. SFP = small form-factor pluggable
2. CWDM = coarse wavelength division multiplexing
3. W = Watt
Table 1 Cisco MDS 9000 Family Supported Software and Hardware Components (continued)
Component Part Number Description Applicable Product