HP StoreOnce VSA 1.1 Software Release Notes (TC458-96015, December 2013)

Fixes

N/A

Outstanding issues not addressed in this release

• If after deployment via SEM or vSphere client, the service set on the VSA is in failed to start state,

this can be due to an invalid destination network selection during deployment. To recover from

this scenario, edit the network settings on the VSA from vSphere client. Right click on the VSA —

Edit Settings — Network adaptor option to select the appropriate destination network. After this,

reboot the VSA to get the service set up and running.

• In the event of loss of access to the datastore, the VSA service set goes down and file system

becomes read-only. This behavior may be seen when the connectivity to the external ESXi storage

is lost or removed when the VSA is powered on and running. The StoreOnce VSA may become

unresponsive in this case. Contact HP Support for assistance at http://www.hp.com/support.

• Deletion of a virtual disk added to the VSA is not supported. If done, this could result in the VSA

becoming unusable.

• Please refer the Troubleshooting section of the HP StoreOnce VSA Deployment and Configuration

Guide for any further issues

Installation instructions (new deployment)

The instructions in this section assume that this is a new deployment of a StoreOnce VSA. If you are

upgrading software on an existing StoreOnce VSA, refer to Update process (page 4).

The StoreOnce VSA 1.1.1 ZIP package can be downloaded from the HP software kiosk.

The ZIP structure is as follows:

DescriptionChecksum (where relevant)Filename

DirectoryTC458A

Open Virtualization Format file for the

StoreOnce VSA

c5f4836aef58a55618fcb0dc2b793e3fTC458A/storeoncevsa-500–3.7.1–1334.4.ovf

Manifest file1ddb1fc5c40ad258dc736d0add7f31f3TC458A/storeoncevsa-500–3.7.1–1334.4.mf

Virtual Machine Disk Format file for

StoreOnce VSA

f59f2469837042aa48469dfc0065e1b5TC458A/storeoncevsa-500–3.7.1–1334.4.disk1.vmdk

HP StoreOnce VSA User GuideTC458–96002

HP StoreOnce VSA Deployment and

Configuration Guide

TC458–96014

HP StoreOnce VSA Release NotesTC458–96015

NOTE: To check whether there any updates to the documentation, go to:

http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=5196525

• Please download the ZIP file from the software kiosk.

• Unzip the ZIP file on a Windows or Linux server. The OVF, MF and VMDK files are to be used

to deploy the VSA; all other files are VSA documentation.

Fixes 3