HP Store Once Backup System 4900 Installation and Configuration Guide

Table 2 Subnet details (continued)
Bonding mode (1, 4 or 6)Ports used (eth0, eth1, eth2, eth3, eth4, eth5)
Portset
number/name
Bonding mode (1, 4 or 6)Ports used (eth0, eth1, eth2, eth3, eth4, eth5)Portset name
Domain nameGatewaySubnet mask
IP address
range
Tag ID if VLAN
subnet
Name and
type (Phys or
VLAN)
Subnet details
Bonding mode (1, 4 or 6)Ports used (eth0, eth1, eth2, eth3, eth4, eth5)Portset name
Domain nameGatewaySubnet mask
IP address
range
Tag ID if VLAN
subnet
Name and
type (Phys or
VLAN)
Subnet details
NOTE: Multiple bonding combinations are available, but 1GbE ports cannot be configured with
10GbE ports.
Network requirements 11