HP Store Once Backup System 4900 Installation and Configuration Guide

Figure 21 Network configuration example
NOTE: The wizard runs continuously. You cannot interrupt it and save the configurations already
specified. However, for the purposes of this example, we have split it into sections to add notes.
1. First, we shall specify the DNS servers and create Portset1 on eth0. We shall keep this as
DHCP in line with the Quick Install option. In reality, you are more likely to re-configure this
portset with static IP addresses, but we shall illustrate this as a post-installation example. See
Modifying a network configuration (page 56) for more information.
# net set wizard
StoreOnce Network Configuration Wizard
--------------------------------------
This Wizard will guide you through the configuration of
network settings on your StoreOnce Backup System.
If you wish to make additions or modifications to an existing
network configuration without having to reconfigure all settings,
use the 'net modify' or 'net add' commands instead.
See the User Guide guide for physical port layout details.
The wizard consists of the following steps:
Step 1) Set system wide DNS server addresses (optional) and cluster size (if multi-node)
Step 2) Configure network settings for available network adapters
Step 3) Save and apply all network settings
Type 'quit' + ENTER at any time to exit wizard.
Step 1) Set system wide DNS server addresses (optional) and cluster size (if multi-node)
----------------------------------------------------------------------------------------
Enter a list (max 3) of DNS servers separated by commas (eg 192.168.1.100,192.168.3.100) or press return
to skip :
-->172.1.1.100,172.1.2.100
<--DNS servers: 172.1.1.100,172.1.2.100
*Step Complete* Do you want to :
1 = Go to next step: Step 2) (default)
2 = Go back to start of present step: Step 1)
3 = Quit wizard and lose all settings
-->1
<--Navigation: Go to next step: Step 2)
Step 2) Configure network settings for available network adapters
-----------------------------------------------------------------
Network configuration using net set wizard 49