HP Store Once Backup System 4900 Installation and Configuration Guide

#
# system show status
Storage Set Status
—----—----–—--- ----––
Set Formatted 34,876.99GB, Adding 37,134.57GB...
Service Sets Status Notes
------------ ------ -----
Set 1 Running
#
7. Once the storage is available performance will not return to normal until parity initialization
has completed.
Accessing the StoreOnce Backup system over SFTP
There are a number of occasions when you may need to access the HP StoreOnce Backup system
over SFTP:
• To transfer software update packages to the correct location in the StoreOnce folder structure.
• To access files that are generated and stored in the StoreOnce folder structure, such as the
Hardware Health report (in the /health folder) , support tickets (in the /tickets folder),
software upgrades (in the /repository folder) and the saved configurations (in the /config
folder).
Figure 23 StoreOnce folder structure
Accessing the StoreOnce folders
Use an SFTP client to access the StoreOnce Backup system.
NOTE: There are a number of SFTP clients available on the internet. For example, FileZilla is a
free, open source SFTP client for Windows and Linux and can be downloaded from https://
filezilla-project .org.
• Using Linux
sftp Admin@<IP_address>
cd <folder_name>
Use the appropriate commands — examples are included in the following sections where
SFTP is used to carry out a specific task.
exit sftp
• Using a Windows SFTP client
Ensure the File Protocol is set to SFTP, not SCP or FTP.
Login to the HP StoreOnce Backup system as Admin.
68 Completing the installation