HP Store Once Backup System 4900 Installation and Configuration Guide

Figure 22 IPsec pairs for Data in Flight Encryption
License requirements
If you wish to use the IPsec feature, you must first install the Security pack license.
Configuring the StoreOnce Backup system
The syntax for the StoreOnce CLI command is:
net add encryption myconfig mysubnet ipAddr clientip passPhrase mypassword
In the following example, we have created a copy of the configuration called config_with_ipsec
that adds encryption to subnet_2. The IP address is the client’s IP address and the passphrase
must match the passphrase that has been configured on the client.
# net add encryption config_with_ipsec subnet_2
nl
ipaddr 172.18.198.101 passphrase securephrase1
Command Successful
NOTE: You still need to validate and activate the configuration file to make encryption active on
the subnet.
The subnet configuration now shows the client IP address in the Encryption Links field.
60 Network configuration, how to use StoreOnce CLI commands