HP StoreOnce VSA Backup System User Guide (TC458-96025)

Best practices for using this feature
WARNING! Failure to follow best practices may cause instability and damage to your backup
system and data. Cartridges can be marked as unusable or the backup application can attempt
to write to target cartridges.
• Verify no replication jobs to the selected target cartridge are in progress.
• Verify no backup jobs to the mapped source cartridges are scheduled.
• Verify the backup application media server instance to be used is not within the same
cell/domain that can access the source cartridge.
• Import the data on the target cartridge into the backup application (this operation must be
repeated after each replicate operation to the cartridge).
• Perform the desired operation on the cartridge, which may be:
Verify the cartridge using the backup application either with a verify command or by
performing a restore.
◦
◦ Copy the cartridge to a physical tape device connected to the media server.
How is a target device made visible?
1. Create the replication mapping as normal. See Running the replication wizard (virtual tape
devices) (page 64), as appropriate.
2. From the host that has access to the target library on the VTL — Libraries page, select the
target library in the Libraries list.
3. Click Edit.
4. The Port defaults to None. Select the appropriate iSCSI Port.
5. Click Update.
6. Make the target library visible from other hosts. Configure the Fibre Channel fabric to make
the host visible. Target visibility persists even if the power fails or if the replication mapping
is removed.
NOTE: To remove target visibility, reset the Port to None.
Make Replication Target libraries visible to the host 29