HP StoreOnce VSA Backup System User Guide (TC458-96025)
How do I identify the IP address of a Service Set?
When configuring replication between different models of StoreOnce Backup systems, be aware
that:
• Replication targets on a StoreOnce 26xx, 2700, 42xx, 44xx, 4500, 4700, and 4900 Backup
system require the IP address of the appliance.
• Replication targets on an StoreOnce VSA Backup system have two virtual NICs supported,
meaning you can have a maximum of two IP addresses for the VSA.
• Replication targets on a StoreOnce 6500 or B6200 Backup system require identification of
the Data VIF IP address of the appropriate Service Sets (also referred to as a node). Each HP
6500 and B6200 Backup system may have up to eight Service Sets (the minimum is two
Service Sets).
NOTE: Service Set Data VIF IP addresses are used for data traffic and are not the same as
the Cluster Management IP address used to log onto the HP StoreOnce Management Console.
You cannot configure the replication targets using the IP address used to log on to the HP
StoreOnce Management Console.
To identify the Data VIF IP from the HP StoreOnce GUI
1. Select the Service Set in the list on the HP StoreOnce page.
2. Locate its Data VIF IP at the bottom of the System Information.
To identify the Data VIF IP from the StoreOnce CLI
Use the net show config command and locate the Node Specific Parameters.
Identify the Network Virtual Data IP entries under each node. The following example is an
extract from the output of the net show config command:
# net show config
----------------------
Network Name: current
Network Description: Management on (2) 1Gb ports (bonded), Data/Replication on (2) 10Gb ports (bonded)
Write Protected: no
DNS Servers: 172.160.10.1
Port Sets: portSet1 portSet2
Management VIF: 172.160.20.1
----------------------
Number of Networks: 2
Number of VLANs configured: 0 out of possible 128
----------------------
Network: subnet1
----------------------
IP Addresses: 192.168.20.60,192.168.20.61,192.168.20.62,192.168.20.63
Net Mask: 255.255.0.0
Domain Name:
Gateway:
Default Network: no
Net Usage: data
What is an appliance? 51