HP StoreOnce VSA Backup System User Guide (TC458-96025)

If the copy job numbers are high (close to the maximum), no user action is required. Copy activities
happen under the control of the StoreOnce Backup system and it will optimize the queuing and
running of jobs based on the resources available. If the Data job count starts getting high, the HP
StoreOnce Backup system is being loaded quite heavily. You may see jobs failing to start or running
slowly (although the aggregate performance across the many jobs should still be high) due to
insufficient resources being available.
NOTE: The maximum data jobs value is not guaranteed in all cases. In some situations, such as
when heavily loaded, the actual maximum may be less (based on resources available to the box
at that time).
StoreOnce Catalyst Settings tab
The StoreOnce Catalyst Settings tab is used to view the settings that apply to Catalyst functions
and jobs for all nodes on the HP StoreOnce Backup system. Users with an Admin login may also
edit these settings.
IMPORTANT: First enable Client Access Permission Checking on this page to assign permissions
when subsequently configuring clients and stores. (If you do not set permissions, all clients can
access all stores.) Client access is also enabled in the ISV backup software.
To edit settings (administrators only)
1. Click Edit.
2. Amend fields as required and click Update.
Table 20 StoreOnce Catalyst Settings fields
DescriptionField
When enabled, the Clients tab is active and the Permissions tab on the Stores
page is active. These tabs enable control over which clients (backup
Client Access Permission Checking
applications) can access which stores on the StoreOnce Backup system. If you
do not set permissions, all clients will be able to access all stores.
The maximum number of outbound copy jobs that can be processed
concurrently. Copy jobs are placed in a queue and processed as soon as
Maximum Concurrent Outbound Copy
Jobs
volume of jobs and any configured blackout windows or bandwidth limiting
allow. The backup application polls the HP StoreOnce Backup system to identify
when copy jobs are complete. It is recommended to limit the maximum number
of concurrent outbound copy jobs to 1 per 512 kbps of available bandwidth.
The maximum number of data and inbound copy jobs that can be processed
concurrently. Blackout windows and bandwidth limiting do not apply to these
jobs.
Maximum Concurrent Data and
Inbound Copy Jobs
This defaults to 9387 and cannot be edited.Command Protocol Port Number
This defaults to 9388 and cannot be edited.Data Protocol Port Number
StoreOnce Catalyst page 83