HP StoreOnce VSA Backup System User Guide (TC458-96025)

To edit bandwidth limiting (administrators only)
1. Display the Bandwidth Limiting Windows tab.
2. Check the General Limiting Enabled box and determine the recommended general bandwidth
limit, which is a simple calculation of:
(Max WAN Speed) x (Max Desired WAN Usage%).
Use the bandwidth limit calculator provided on this page to work out limit values, if required.
3. Click Edit to edit the Bandwidth Limiting Windows.
Configure up to two windows for each day.
Verify the appropriate Apply First/Second Restriction check boxes are checked. This ensures
the specified times are enabled. If not checked, the times are ignored. Then manually enter
the required Bandwidth Limit in each required window.
Use the bandwidth limit calculator provided on this page to work out limit values, if required.
NOTE: All settings are applied to the HP StoreOnce Backup system and not for individual
jobs. The Bandwidth Limit windows override the General Limit when the time specified for the
window is active. The General Limit applies outside of Bandwidth Limit windows.
4. Click Apply.
Catalyst Stores page
Select StoreOnce Catalyst—Stores from the Navigator to display the Stores page and tabs.
The top half of the Stores page shows all stores configured for the appliance. Click on a store to
display its details in the lower half of the page. Users with an Admin login may edit these settings
or delete stores, and may also create new stores.
The lower half of the page has the following tabs:
• Store Details tab (page 88), includes functions for creating and managing stores
• Permissions tab (page 90)
Catalyst Stores page 87