HP StoreOnce VSA Backup System User Guide (TC458-96025)

Table 26 Data job fields
DescriptionField
The name of the item within data job. This name is created by the backup application.
Each data job may have multiple items.
Item Name
The status of the data job item, which may be:Status
• Running: in progress
• Completed: the item has completed successfully, this does not mean the data job has
completed, only the item, and does not reconcile with the backup application job
completion status
• Cancelled: the Status Information provides more details, for example, the data
connection has been lost between the HP StoreOnce Backup system and the media
server (this is unlikely to occur)
• Unexpected error: the StoreOnce Backup system has experienced a problem whole
processing the item
• Insufficient disk space: it will be necessary to clear some disk space or add more storage
• Link failure: IP connectivity has been lost and the backup application must retry the job
• System shutdown: System has been shut down
NOTE: The backup application must be configured to tidy up any incomplete or orphaned
items before retrying the job.
The amount of user data that was written. This reconciles with the information in the backup
application's log, but note that a backup job may span multiple items.
Data Written
The write throughput speed. The first figure, expressed in MB/s, is the logical bandwidth;
the second figure, expressed in Mb/s is the physical bandwidth consumed. The %
Write Throughput
bandwidth saving depends upon whether the store has been configured for source-side
deduplication with a low-bandwidth transfer policy, or target-side deduplication with a
high-bandwidth transfer policy. See Store Details tab (page 88).
The amount of user data that was read.Data Read
The read throughput speed. This only has one value because read throughput is always
high throughput without any % saving.
Read Throughput
The client that initiated the data job, as defined on the backup application. The IP address
in the brackets is for information and not part of the client name. It is best practice to
Client Identifier
ensure that a meaningful name is given to the client within the backup application. If no
client was defined on the backup application, only the IP address is shown.
The time the job started.Start Time
The time the job ended.End Time
94 HP StoreOnce Catalyst functions