Setup Instructions for the HP OpenStorage (OST) Plug-in for Symantec NetBackup using HP StoreOnce Backup Systems

Table 4 Parameters used with hpost.config configuration file (continued)
DescriptionParameter syntax
Specifies the user-specified file name for catalyst logs.CATALYST-LOGFILE:
Default: catalyst.log
<filename>
Example: CATALYST-LOGFILE:catalyst.log
Sets the maximum size before catalyst logs roll over.CATALYST-LOGSIZE:
Default: 5 (MB)
<size>
Example: CATALYST-LOGSIZE:10
Specifies the number of retries made by the plug-in to secure a command
session before declaring a failure.
CMDSESSION-RETRY-NUMBER:
<count>
Default: 5 seconds
Example: CMDSESSION-RETRY-NUMBER:120
Specifies the number of seconds to sleep before retrying to secure a
command session.
CMDSESSION-SLEEP-SECONDS:
<seconds>
Default: 6
Example: CMDSESSION-SLEEP-SECONDS:15
HP OST v2.0 and above supports caching of server properties and other
server related information. This parameter controls the cache lifetime.
SERVER-REFRESH-SECONDS:
<seconds>
Default: 300 (seconds)
Example: SERVER-REFRESH-SECONDS:300
HP OST v2.0 and above supports the caching of LSU properties and LSU
related information. This parameter controls the cache lifetime.
LSU-REFRESH-SECONDS:
<seconds>
Default: 300 (seconds)
Example: LSU-REFRESH-SECONDS:300
11