Setup Instructions for the HP OpenStorage (OST) Plug-in for Symantec NetBackup using HP StoreOnce Backup Systems

Figure 1 AIR setup between Object_Store_1 of Storage_Server_1 and Object_Store_2 of
Storage_Server_2
2. Backup domain 11. Network domain
4. NBU media server 13. Backup domain 2
6. Client identifier5. NBU media server 2
8. Storage server 27. Storage server 1
10. Object store 29. Object store 1
11. Object store 3
AIR Prerequisites
Before setting up AIR, makes sure that:
• NBU source and target master domains are accessible over the network to each other.
• Both source and target stores use the same client identifier for the AIR operation (in case client
access permission checking is enabled).
• NBU does not have any provisions for setting up replication topologies for third-party storage
vendors. To set up replication topologies for the HP StoreOnce Backup System, storage
administrators must use the tpman tool that shipped with the HP OST plug-in.
• The source and target master domain, AIR SLP names and data classification, are exactly the
same.
• The date and time on source and target NBU domains should be set to their respective current
time. NBU delays import of images at the target master if the time stamp on the replicated
image is in the future.
AIR Prerequisites 13