Setup Instructions for the HP OpenStorage (OST) Plug-in for Symantec NetBackup using HP StoreOnce Backup Systems
AIX:
• HP OST Plug-in: libstspihpq.so and libstspihpqMT.so
• Located in: /usr/openv/lib/ost-plugins
• Supporting DLLs: /usr/openv/hp/ost/3.0/lib
• Configuration files: /usr/openv/hp/ost/3.0/config
• Log files: /usr/openv/hp/ost/3.0/logs
Uninstalling the OST plug-in
To uninstall the OST plug-in, complete the following steps, as applicable:
Linux:
1. Shut down all NBU services by using the bp.kill_all command.
2. Remove the rpm package by executing the rpm -e libstspihpq command.
Windows:
1. Shut down all NBU services by using the bpdown command.
2. Click Start→ Control Panel→Add or Remove Programs.
3. Select HP OST Plugin for Symantec NetBackup.
4. Click Uninstall. The plug-in is uninstalled, and all related files are deleted from the system; no
reboot is required.
HP-UX:
1. Shut down all NBU services by using the bp.kill_all command.
2. Remove the plug-in by using the swremove HPOST3_0 command.
AIX:
1. Shut down all NBU services by using the bp.kill_all command.
2. Run the uninstall.sh command.
3. Follow on-screen instructions.
8 Installing the HP OpenStorage (OST) plug-in