HP StoreOnce Backup System Concepts and Configuration Guidelines (BB877-90913, November 2013)

Template 5, uses 1GbE network only
For software revision 3.3.0 and greater: Template 5 supports users who want to have only two
1GbE network connections from each node in a couplet to their Ethernet switches. The same network
is used for data and management. It is primarily for customers who only use VTL as their backup
targets and do not use StoreOnce Catalyst stores or NAS CIFS/NFS shares. VTL replication jobs
will still run over the Ethernet connections.
The default bonding mode for this template is Mode 1, Active/Backup, on both sub-nets.
The recommended IP address range is 17 in total: 1 for management and 16 contiguous for data.
Figure 20 Template 5 cabling to customer's networks
bonded 1 GbE ports to customer's data and management network1 and 3
not used2 and 4
internal cabling, should not be removedblue cables
40 Network configuration in multi-node StoreOnce Backup systems